How does torque affect ball flight?

If we think about torque affecting how the club head is delivered to the ball at impact, you can imagine that it would affect ball flight. One study in 2017, showed that shafts with a higher torque caused a more open club face at impact which led to a slightly higher launch that tended to go right.

How important is torque in golf shaft?

A shaft with a lower torque rating means the shaft better resists twisting; a shaft with a higher torque rating means the shaft is more prone to twisting (all other things being equal). A golfer's swing, and the clubhead attached to the end of the shaft, exert forces on the shaft that lead to twisting.

What does torque in a driver shaft mean?

Shaft torque is measured by a device that records the amount a shaft will twist under a certain amount of force, and it's recorded in degrees. A shaft with 3 degrees of torque will twist less than a shaft with 5 degrees of torque, and so on.

What is torque in a golf club?

Torque is defined as “a twisting force that tends to cause rotation.” In the case of a golf shaft, it's the amount of twisting (or lack thereof) that occurs during the swing.

What is considered low torque in driver shaft?

A low-torque shaft may allow only 2 degrees (or less) of twist, while a high-torque shaft might go all the way to 6 degrees.

How does golf shaft torque affect ball flight?

If we think about torque affecting how the club head is delivered to the ball at impact, you can imagine that it would affect ball flight. One study in 2017, showed that shafts with a higher torque caused a more open club face at impact which led to a slightly higher launch that tended to go right.

Does tipping a shaft affect torque?

In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.

What does torque and kick point mean?

Kick point will influence how the club feels and what trajectory the ball launches at. Torque: This measures, usually in degrees, the shaft's resistance to twisting. Low torque (around 2-3 degrees) means it doesn't twist, or torque, much at all, whereas high torque (around 5+ degrees) means the shaft twists a lot.

What kick point should I use golf?

Unless you think you have a significant problem with a ball flight that is too low or too high, the mid-kick point golf club will be the best choice. The mid-kick point drivers are easiest to find in the game improvement category of golf clubs.

What do the numbers on Hzrdus shaft mean?

The Project X flex system uses numbers to denote flex. A scale of 5.0 to 7.0 is used to mark flexes between regular and Tour-extra-stiff. The HZRDUS Black comes in 60- and 70-gram weights with 5.5, 6.0, and 6.5 flexes, regular+, stiff, and extra-stiff respectively.

What weight driver shaft should I use?

Shafts can range anywhere from 40 to 85 grams. Typically, the rule of thumb is that a golfer with a slow swing might use lighter shaft, and he/she would add weight as swing speed increases. The simple fact is that the lighter shafts provide the opportunity to increase swing speed.

What is a mid kick point for golf shaft?

A mid kick point bows in the middle of the shaft and will have a medium-high trajectory. A high kick point bows near the grip end of the shaft and produces a low trajectory. You need a fast swing speed to play a shaft with a high kick point.

What happens if golf shaft is too stiff?

If your golf shaft is too stiff and your swing speed is too slow, your well-struck shot will be limited on both carry distance and shot trajectory; a too-stiff golf shaft will most often lead to weak fades or slices.

How is shaft torque calculated?

For motors, find torque (in ft-lb) using this equation: T = (HP*5252)/rpm.

What does a stiff shaft do for golf?

Playing a golf shaft that is too stiff will lead to decreased distance. In addition to losing yards off the tee, you may experience a low and right ball flight since you aren't flexing the golf shaft properly. Playing a golf shaft that is too shaft is less damaging than playing a golf shaft that is too stiff.

Is stiff shaft better than regular?

Stiff shafts are more efficient if you give them enough power. They have higher kick points to assist the player to control the speed and landing distance of the ball efficiently.

What does Lite Flex mean in golf clubs?

This is a flex that suits those who swing it just a little too slowly for a regular shaft. This shaft will give you even more forgiveness. Golfers that hit their driver between 210-230 yards will benefit from lite flex. Driver swing speeds of about 85mph will be great for this shaft flex.

How does swing weight affect ball flight?

If the swingweight is too light, you will sense you're having a harder time controlling your tempo and the number of times you hit the ball on the heel or top it will increase. If the swingweight is too high, you will find yourself pushing the ball more, and the club will feel too heavy and more laborious to swing.

What kind of shafts do pro golfers use?

True Temper's Dynamic Golf steel shaft has been the most popular shaft on the PGA Tour, and according to the True Temper website, 90 percent of golfers in any particular tournament play True Temper shafts. The Dynamic Golf shaft comes in different weights, diameters and lengths.

What driver shaft is most used on tour?

Fujikura's Ventus, which has been the most played shaft on the PGA Tour, is available in 23 versions on its website.

What is TS flex on a golf shaft?

So the TS are short for Tour Stiff. This is a flex that is stiffer than traditional S flex but softer than X flex within the same family of shafts.

Does shortening a driver shaft make it stiffer?

Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.

What is prepping a golf shaft?

Graphite. Shafts: Lightly sand shaft from tape to tip with 150 grit or finer sand paper to remove the polyurethane finish and all the paint. This operation is "prepping" the shaft and can be done by The GolfWorks (PREP).

Does cutting shaft make stiffer?

Cutting a club from the butt end will have somewhat the opposite effect, making the shaft stiffer overall but shorter as well. The most fundamental difference in a shorter club is shorter shot distance, and you might find the change in stiffness is not worth the change to your club.

Are all golf club wrenches the same?

You see, the wrenches from TaylorMade, Ping, Callaway, Titleist, Cobra, Mizuno and Nike all have the same head design, and the wrenches tend to use approximately the same torque rating (about 40 in./lb.). That means you can get away with adjusting all of these clubs with a single wrench.