you should be fine on any board that has a waist width over 25cm. at an even 25cm you may experience some toe or heel drag depending on how much lift your bindings give you. but usually for size 11 boots you do not need a wide board.
How wide of a snowboard do I need for a size 11 boot?
As a general consensus among the big-footed experts here, you should stick to a waist width above 258mm/25.8cm if you're rockin' size 11 or 11.5 boots. For a size 12 and up, you'll probably feel most comfortable on a waist width minimum of 260-265mm/26.0-26.5cm.
What size boot requires a wide board?
Get a Wide Snowboard. Typically, snowboard boot sizes 11.5+ will need a wide specific model which is going to have a waist width of 260mm or more.
What shoe size do you need a wide snowboard?
The most important thing is your shoe size. For men, If you have a boot size of more than 11.5 (US) then you need a wide snowboard. For women, if you have a boot size of more than 13 (US), you need a wide snowboard.
How do you know if you need a wide board?
Riders with bigger feet may need a wider board to eliminate heel and toe drag. With the technology in Burton boots making them smaller and smaller the line between wide and normal is getting blurry. If you have a boot that is lower profile you may not need a wide board unless your foot is US 12 or over.
37 related questions foundDo I need a wide snowboard size 10?
Unfortunately some companies will exaggerate what is a wide, mid-wide or normal width snowboard. This is where the majority of board sizes sit. Guys with US boot size 8-10 should avoid wider boards. Also Women with size 10 boots can also ride these boards.
How do you tell if a snowboard is wide?
What is a Wide Snowboard? Wide snowboards usually have a waist width of over 260mm. The waist of the snowboard, where the bindings are attached, is wider than that of a regular snowboard. This prevents the toes from dragging over the edge when a toe side turn is initiated.
Can I ride a wide snowboard?
The majority of snowboard companies offer wide models to accommodate avid riders who have a large stature. While the wide snowboard offers increased stability at breakneck speeds, it can hinder your maneuverability during certain riding techniques.
Are wide snowboards harder to turn?
Well, as you may well realise, a wide snowboard makes it more difficult to initiate an edge change, therefore making it more difficult to turn.
Are snowboard boot sizes the same as shoes?
Snowboard boot size, compared to shoe size, is the same, but it could vary between brands. You'll also find snowboard boots in mondo size, measured in centimeters, which is the length of the boot's inner sole. The width of your feet: You may have narrow, wide or average feet, so, again, consider your usual shoe size.
How do I know if I need wide snowboard boots?
How to know if you need wide snowboard boots? Probably the best indication that you need wide fitting boots is that your feet will be hurting like hell after a few runs! Boots which are too narrow for your feet will cause cramp and loss of circulation, especially across the widest part of the foot and the toes.
Do I need a mid wide snowboard?
Riders with a boot size of 10 – 11.5 should consider a midwide snowboard. Keep in mind that the make of the boot, year of the boot and stance angles might affect whether or not a rider needs a midwide board. Older boots tend to be bulkier, which would definitely warrant a midwide board for sizes 10 – 11.5.
How much boot overhang is OK on a snowboard?
1/2 inch to 3/4 inch of boot overhang for both toe and heel is ideal, and will not create problematic toe or heel drag. Remember that boots typically add 1/2 at both the toe and heel to your foot measurement from above, due to padding, insulation and the outer boot materials.
Is a wide snowboard more stable?
An added bonus of wider boards is that they're more stable for landing jumps and offer increased float in deep snow, though they sacrifice a little turning performance and tend to be heavier.
How far apart should your feet be on a snowboard?
When we're talking about snowboards, your “width” is the distance between your bindings. If you're a beginner, you'll likely be advised to have your feet about shoulder-width apart.
Why is waist width important for snowboarding?
The waist width of a snowboard is a critical performance dimension. If your board is too wide, it will feel slow moving edge to edge. If your board is too narrow, you will drag the toe cap or heel cup of your binding in the snow when you turn sharply.
Should snowboard boots be tight?
Snowboard boots should feel snug everywhere—snug at your heel, instep, and toebox, and your toes should barely touch the ends. So don't freak if they feel too tight at first because if they fit "just right" straight outta the box, chances are you'll be screwed in a week.
Do I need a wide board for 10.5 boots?
The fact that they are off by 1 mondo size with normal shoe sizing is irrelevant to their main point, which is if you wear a size 10 or 10.5 boot you should be on one of their wider boards not regular.
What size boot do I need?
If you don't remember the size, look inside the shaft of the boots or on the inside bottom. If this is your first pair of workboots, normally start with 1/2 a size down from your normal shoe size. If you are between sizes, order 1/2 size up.
How do I know my boot size?
Wrap the measuring tape or string all the way around your foot at the widest part (typically the bunion joint) and measure the circumference. Do this for both feet, as there may be some variation in foot size. Typically, the length plus 1 inch is generally your boot size with most manufacturers.
Are boot sizes the same as shoe sizes?
Your boot size will often not be the same as your shoe size, though for some people it will be. There are a few reasons for this. Partially, it has to do with the way that sizes are measured. Partially it has to do with the lasts that shoemakers use to make shoes.
