Are Mini Logo bearings good?

This is a really great bearing for any skater/longboarder. These spin and spin! I clean my bearings about once a month and I have found that very little dirt gets inside. The bearings are also super easy to clean because both sides are removable.

Are mini logo bearings the same as Reds?

Thanks in advance. It's my understanding that mini logo bearings are made in the same factory as bones reds. I've skated them and they're good- go ahead and save a few bucks!

What ABEC rating are mini logo bearings?

Mini Logo 8mm ABEC 3 Skateboard Bearings.

Which bearing is best for skateboard?

What Are Best Skateboard Bearings?

1. Bronson Speed Co. G2 (Winner) ...
2. Bones Reds (Runner-up) Bones Reds are the most popular bearings because they are cheap and just work for all skateboards. ...
3. Bronson G3. ...
4. Bones Super Reds. ...
5. Bronson Raw. ...
6. Bronson Ceramics. ...
7. Bones Swiss 6 balls. ...
8. Bones Red Ceramics.

What brand has the fastest skateboard bearings?

Bones Swiss Ceramics are some of the fastest skateboard bearings on the market. A winning combination of Bones precision ground and polished races, fiber reinforced high speed ball retainer, Cerbec silicon nitride ceramic balls, Speed Cream racing formula lubricant, and a frictionless, non-contact shield.

Do pros use bearing spacers?

Bearing spacers are totally optional; longboarders and casual skaters likely won't put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard.

Do bearing spacers slow you down?

This will slow your bearings down and wear them out super fast! Skaters without bearing spacers might find it easier to just run their axle nuts a bit loose to keep the wheels spinning freely. This is even worse! A wheel that is loose on the axle will give a noisy, chattery ride.

Are Reds good bearings?

We agree with skateboarders all over the world that Bones Reds are the best low-price high-quality bearings skateboarding has to offer. They are super smooth and long lasting. Just like any bearing, you should keep them out of the rain and expect that riding through sand and dirt put lots of wear on them.

What bearings are good for speed?

Best Overall: BONES SWISS

Bones Swiss bearings are engineered to be fast and durable. They come pre-lubricated with Speed Cream Racing Lubricant. According to many users, Bones Swiss bearings are capable of lasting for years when properly maintained.

What are the fastest bearings?

The Bones Swiss 608 Skate Bearings have become legendary since their introduction in 1983. For decades, this has been perhaps the fastest, smoothest, and longest-lasting bearing on the market.

Is Abeec 7 or 9 better?

Most people won't notice a significant difference between ABEC7 versus ABEC9. Unless you are skating for speed at a high level, ABEC7 should be fine for urban skating.

Is higher ABEC better?

Thus, bearings with a higher ABEC rating have tighter tolerances, and that means better precision, higher efficiency, and the potential to accommodate applications requiring high speeds.

What is the fastest ABEC bearings?

How ABEC Ratings Work

• ABEC 1 is the most crude, the least precise, the most durable, and the cheapest.
• ABEC 3 is what most cheap complete skateboards come with, especially skateboards from China. ...
• ABEC 5 bearings are the norm in skateboarding. ...
• ABEC 7 bearings would be very fast and smooth, but very expensive.

Are titanium skateboard bearings good?

Titanium coated ball bearings are more resistant to pitting and damage from skating, as titanium is a tougher and more dense material than steel. Titanium coated ball bearings are more precise than steel ball which means less friction and heat, thus more speed.

Are Spitfire Burner Bearings good?

The Spitfire Burner Bearings are a true high performance precision speed bearing. Designed specifically for skateboarding, they're impact resistant with removable nylon cages, heat resistant with high carbon chromium steel rings, sport super polished honed races, and are built to last, guaranteed.

Are ABEC 11 bearings real?

ABEC from a precision standpoint refers to the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA). ABEC precision levels do indeed stop at level 9 (there is no ABEC 11 precision level).

Are Bones Swiss faster than reds?

These ones are lighter and provide faster acceleration because the balls weigh much less. They create less friction and are thus faster than Super REDS™, with or without lubricant!

Are Bones Swiss worth it?

At the top end of the price range, (only Bones Swiss Ceramic Bearings are more expensive at around £140.00 per set), Bones Swiss bearings are worth every single penny you will spend on them and are substantively better than all competitors in terms of both performance and durability.

Does it matter what bearings you get?

You can't go wrong. Nearly all skateboard bearings have been standardized so that all wheel and bearing brands are compatible. The standard skateboard bearing size is an 8mm inner race diameter.

Do Bones Reds come with spacers?

Includes a set of 8 Bones Reds Bearings, 8 Speed Washers, and 4 Bearing Spacers. Instructions and Sticker are included in the box of Bones Reds Bearings. Bones Reds Bearings fit all skateboard wheels.

Do longboards use different bearings?

Standard longboard bearings are the same as any other skateboard bearings. You could use them on any board of any length. You'll need two bearings per individual wheel, and the bearings can be installed alone. Standard bearings are typically made out of steel or ceramic to achieve a smooth, speedy ride.

Are speed rings necessary?

Speed Rings are an often overlooked part of your skateboard, but not having them could be greatly jeopardizing your performance! Speed rings go on the outside of your bearings to give more clearance, allowing an uninhibited continuous roll.

Should you use riser pads?

Deciding whether or not to install risers

The larger your wheels are, the greater chance there is for wheel bite. If your skateboard has large wheels, such as on a longboard or cruiser, you may want to consider risers. In general, the longer the board and the larger the wheel, the more height is needed in a riser pad.

Should skateboard wheels wiggle?

Your skateboard wheels should be tight enough that they spin freely. However, you don't want the wheels so loose that they wiggle on the truck's axle. To see if you need to tighten your wheels, put the board on its side, and flick the wheel as fast and as hard as you can with one hand.